Dental Model Water Washable 3D Printing Resin

RF-ZJ-02 is a water washable dental model resin for professional 3D printing. Its distinguishing feature is water-based cleaning of the printed model, making the cleaning stage a useful selection point when comparing model materials.

Material at a glance

• Material: Water Washable Dental Model Resin
• Model: RF-ZJ-02
• Printing methods: LCD / DLP; confirm the profile for your printer and material.
• Professional audience: Dental laboratories and production teams.
• TDS typical viscosity: 400 mPa·s
• TDS typical flexural strength: 55.4 MPa

These are TDS reference values. Cured results vary with equipment, processing and test conditions; consult the current technical data sheet for the full specification.

Choosing this material

Choose RF-ZJ-02 when water washing is part of your planned laboratory process. Washing, drying and post-curing are separate steps; use the current material instructions for each stage.

Common question

Does water washable mean the model is finished after washing?

No. Water washing describes the cleaning stage. Drying and the specified post-curing process still need to be completed before the model is used.

Compare model resin for thermoforming or browse the dental 3D printing resin range.

Technical documentation

• Download RF-ZJ-02 Technical Data Sheet (English PDF)
• View material properties and post-processing guidance
• Find printer settings in the parameter database

Use the RF-ZJ-02 / Water washable material entry when reviewing printer settings. Validate the selected profile on your printer before production.

For the safety data sheet or additional printer-specific guidance, contact RayForm technical support. Include your printer model and intended application.